C106MG 4A 600V SCR Glassivated PNPN devices designed for high volume consumer applications such as temperature, light, and speed control; process and remote control, and warning systems where reliability of operation is important. Features Glassivated Surface for Reliability and Uniformity Power Rated at Economical Prices ..

TYN-612 8A 600V SCR The TYN/TXN 0512 ---> TYN/TXN 1012 Family of Silicon Controlled Rectifiers uses a high performance glass passivated technology. This general purpose Family of Silicon Controlled Rectifiers is designed for power supplies up to 400Hz on resistive or inductive load. Features Gate Turn-On Voltage (Vgt): 1.5V ..

XL0840 0.8A 400V Sensitive gate ( XL08 ) - SCR Highly sensitive triggering levels, the XL0840 device is suitable for all high volumes applications where the available gate current is limited, such as Christmas lights control. Features / Specification Rated Repetitive Off-State Voltage VDRM: 400 V Off-State Leakage Current @ V..

BT136 4A 500V TRIAC Glass passivated triacs in a plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, voltages industrial and domestic lighting, heating and static switching. Futures ..

BT139 16A 800V TRIAC (High Quality - Original) Glass passivated triacs in a plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, voltages industrial and domestic lighting, heating and static swit..

BTA-12 12A 600V TRIAC Available either in through-hole or surface-mount packages, the BTA/BTB12 and T12 triac series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits... or for phase control operation in light dimmers,..

BTA41 40A 600V TRIAC The BTA/BTB40-41 series is suitable for general purpose AC power switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, water heaters, induction motor starting circuits, welding equipment... or for phase control operation in high power motor speed controllers, soft start..

MAC97A 0.8A 600V TRIAC (High Quality - Original) Futures Non Repetitive On-State Current: 8 A Rated Repetitive Off-State Voltage VDRM: 600 V Off-State Leakage Current @ VDRM IDRM: 10 uA On-State Voltage: 1.9 V Holding Current Ih Max: 10 mA Gate Trigger Voltage - Vgt: 2.5 V Gate Trigger Current -..

TYN-280 SCR   *Image shown is a representation only...

BTA-06 6A 600V TRIAC Available either in through-hole or surface-mount packages, the BTA/BTB06 and T06 triac series is suitable for general purpose AC switching. They can be used as an ON/OFF function in applications such as static relays, heating regulation, induction motor starting circuits... or for phase control operation in light dimmers, ..

DB3 Trigger Diode High reliability glass passivation insuring parameter stability and protection against junction contamination. Features   Breakover Voltage (Vbo): 32V Output Voltage (Vo): 5V Repetitive Peak On-State Current (Itrm): 2.0A Breakover Current (Ibo): 0.100mA Total Power Dissipation (Ptot..

2N6027 Sensitive Gate Triacs THY 4A 600V TRIAC Designed primarily for full‐wave AC control applications, such as light dimmers, motor controls, heating controls and power supplies; or wherever full‐wave silicon gate controlled solid‐state devices are needed. Triac type thyristors switch from a blocking to a conducting state for either po..