BTA12 12A 600V Triac - bta12 - To-220

BTA12 12A 600V Triac - TO-220 AC Switching Component

The BTA12 12A 600V Triac is an AC switching component. It is housed in a TO-220 package. This triac controls AC loads in industrial and consumer electronics. It provides operation for static relays and heating regulation. Capabilities extend to induction motor starting circuits and phase control. It is used in light dimmers and motor speed controllers. The device features a peak off-state voltage of 600V and an on-state current of 12A. It offers stable power management for projects.

Specifications:

• Gate Turn-On Voltage (Vgt): 1.3V
• Peak Off-State Voltage (Vdrm): 600V
• On-State Current (It): 12.0A
• Gate Current (Igt): 35mA
• Average Gate Power Dissipation (Pg): 1W
• Package Type: TO-220
• Typical Voltage Change over Time (dV/dT): 500V/µs

Key features and benefits:

• Peak Off-State Voltage (Vdrm): 600V
• On-State Current (It): 12A
• Gate Turn-On Voltage (Vgt): 1.3V
• TO-220 Through-Hole Package
• Gate Current (Igt): 35mA
• Average Gate Power Dissipation (Pg): 1W
• Typical Voltage Change over Time (dV/dT): 500V/µs

Applications:

• Static Relays and Solid-State Switching
• Heating Regulation Systems
• Induction Motor Starting Circuits
• Light Dimming Controls
• Motor Speed Controllers

Frequently Asked Questions:

Q: Can this BTA12 triac replace other 12A 600V TO-220 triacs?
A: This BTA12 triac is a standard 12A 600V component in a TO-220 package. Compatibility with other triacs depends on matching electrical specifications (Vdrm, It, Igt, Vgt) and pinout. Refer to datasheets for direct cross-referencing.

Q: What is the recommended heatsink for the BTA12 12A triac?
A: Heatsink requirements depend on the specific application's power dissipation and ambient temperature. Consult the device's datasheet for thermal resistance values and calculate based on expected on-state current and duty cycle.

Q: Is the BTA12 suitable for inductive loads?
A: The BTA12 triac is suitable for inductive loads. Its dV/dT rating of 500V/µs helps manage voltage transients common with inductive switching. External snubber circuits may be required for highly inductive loads.

Q: What is the pinout configuration for the BTA12 TO-220 package?
A: The standard TO-220 pinout for a triac like the BTA12 is typically Main Terminal 1 (MT1), Main Terminal 2 (MT2), and Gate (G). Refer to the specific manufacturer's datasheet for exact pin assignments.

Package Includes:

*Image shown is a representation only.

Note: Contact sales(at)electroncomponents.com for bulk enquiry & get best price!