Digital Multimeter - DT830 D General Description The DT830D Digital Multimeter is a very affordable and handy piece of test equipment. It features an easy to read 3.5 digit LCD display. It is equipped with 5 functions and 19 ranges, each test position is quickly and easily selected with a simple turn of the single selector switch. It al..

Digital Multimeter - H-9A TRMS - High quality [Free shipping] Features Low battery indication & Auto power off  Audible continuity  Overload protection  Frequency measurement  Capacitance Measurement Temperature Measurement TRUE RMS(sinusoidal waveform RMS calibration) Au..

Digital Multimeter - M890G (VAR Tech - Orginal) - High quality Features 3 1/2 digits large LCD display (18mm)   Low battery indication & Auto power off  Audible continuity  Overload protection  Frequency measurement  Capacitance Measurement Temperature Measurement Au..

Digital Multimeter - MAS830L (hbTech - Orginal) - High quality Features Pocket Size and 2000 counts LCD Display Tests AC/DC Voltage, DC Current and Resistance Transistor Check, Diode and Continuity Test Display Back Light Data Hold SPECIFICATIONS – hbTECH MAS-830L ..

Digital Multimeter - MAS830L (MASTECH - Orginal) - High quality Features Pocket Size and 2000 counts LCD Display Tests AC/DC Voltage, DC Current and Resistance Transistor Check, Diode and Continuity Test Display Back Light Data Hold SPECIFICATIONS – MASTECH  MAS-83..

Digital Multimeter - MAS830L (VAR Tech - Orginal) - High quality Features Pocket Size and 2000 counts LCD Display Tests AC/DC Voltage, DC Current and Resistance Transistor Check, Diode and Continuity Test Display Back Light Data Hold SPECIFICATIONS – VARTECH MAS-830L ..

Digital Multimeter Probe Test Leads General Description Replacement test leads for digital multimeter, fits perfectly for all most all the standard digital multimeters.   *Image shown is a representation only...

IR Meter - MT-4 Infrared Termometer (Orginal) - High quality This infrared thermometer is used for measuring the temperature of the object's surface, which is applicable for various hot, hazardous or hard-to reach objects without contact safely and quickly. Specifications   Model No. MT-4 Type Of ..

  Digital Clamp Meter - 266 (Local)   Brief Specifications DCV :0-1000V(±0.8%) ACV :0-750V (±1.0%) ACA :0-200-1kA(±2.0%) R :0-200-20Kohm (±1.0%) Insulation Tester : 100k-20M(±2.0%) - 2000Mohm (±4.0%) Audible continuity:<50+25ohm Battery: 9Vx1 * Image shown is a representatio..

Breadboard - GL12 General Description A breadboard (protoboard) is a construction base for prototyping of electronics. The term is commonly used to refer to solderless breadboard (plugboard).  Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand heavy use. Feat..

Digital Multimeter Probe Test Leads [High Quality] General Description Replacement test leads for digital multimeter, fits perfectly for all most all the standard digital multimeters.   *Image shown is a representation only...

Doat Breadboard - WB-102 [Original] General Description A breadboard (protoboard) is a construction base for prototyping of electronics. The term is commonly used to refer to solderless breadboard (plugboard).  Plastic Body for reduced static, suitable for CMOS devices. Pins are designed for multiple insertions and will withstand h..

Etch Resist (Resistant) Pen - Copper PCB (making 0.5mm fine tip) This pen is a water-proof containing permanent ink which has etch resist properties. A nylon tipped pen for fast fabrication of perfect printed circuit boards. Circuits can be drawn on plain copper laminate and then etched in Ferric Chloride or etchant solutions. Allow it to dry f..

Jump Wire - Solder less Breadboard flexible cable (Pack of 10)   The breadboard jump wire/cable helps you to build any circuitry on breadboard easily. These cables are flexible with both ends of a prototyping board connector.   Applications Generally used in breadboard solderless circuiting. Ideal for creating circ..

Tag Board - 20 x 2 rows 118 mm Solder Tag General Description Economical and compact tag board, Ideal for hardwiring and building amplifier 2 rows of 20 tag connections, measuring 118mm(l) x 38mm(w) x 8mm(d) and board thickness 1.5mm. Fixing hole centres 105mm apart and every 10mm inbetween. Tag hole centres 6.5mm pitch. Used for variou..