MAC97A 0.8A 600V Triac (Original) - mac97

MAC97A 0.8A 600V Triac (Original) - TO-92-3

The MAC97A 0.8A 600V Triac is a semiconductor device. It facilitates AC power switching and control in electronic circuits. This component has an on-state current of 0.8A and a repetitive off-state voltage of 600V. It operates across a temperature range from -40°C to +110°C. The MAC97A is supplied in a TO-92-3 package. This through-hole component is suitable for various power management applications. It provides consistent power management.

Specifications:

• Non Repetitive On-State Current: 8 A
• Rated Repetitive Off-State Voltage VDRM: 600 V
• Off-State Leakage Current @ VDRM IDRM: 10 uA
• On-State Voltage: 1.9 V
• Holding Current Ih Max: 10 mA
• Gate Trigger Voltage - Vgt: 2.5 V
• Gate Trigger Current - Igt: 7 mA
• Maximum Operating Temperature: + 110 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: Through Hole
• Package / Case: TO-92-3 (TO-226)
• Breakover Current IBO Max: 8 A

Key features and benefits:

• Original MAC97A Triac
• 0.8A On-State Current, 600V Off-State Voltage
• Non-Repetitive On-State Current: 8 A
• Operating temperature range: -40°C to +110°C
• TO-92-3 (TO-226) Through Hole package
• Gate Trigger Current: 7 mA
• Off-State Leakage Current: 10 uA

Applications:

• AC light dimmers and lighting control
• Motor speed control for fans and small appliances
• Solid-state relays and switching circuits
• Temperature control systems
• Power switching in home appliances
• Industrial control circuits

Frequently Asked Questions:

Q: Is this MAC97A Triac a direct replacement for other 0.8A 600V Triacs?
A: The MAC97A is a standard 0.8A 600V Triac. Compatibility with other Triacs depends on specific electrical characteristics and package dimensions. Refer to the datasheet for detailed comparison.

Q: What is the lead pitch for the TO-92-3 package?
A: The standard lead pitch for a TO-92-3 package is typically 2.54 mm (0.1 inch).

Q: Can this Triac be used for 220V AC applications?
A: Yes, with a repetitive off-state voltage of 600V, this Triac is suitable for 220V AC applications, allowing for sufficient voltage headroom.

Q: What is the recommended gate drive current for this Triac?
A: The Gate Trigger Current (Igt) for this Triac is 7 mA. Ensure the gate drive circuit provides at least this current for reliable triggering.

Q: Does this package require a heatsink for typical operation?
A: For 0.8A continuous current, a heatsink is generally not required for the TO-92-3 package under typical ambient conditions. Monitor operating temperature in specific applications.

Package Includes:

*Image shown is a representation only.

Note: Contact sales(at)electroncomponents.com for bulk enquiry & get best price!