BTA12 12A 600V Triac - bta12 - To-220

BTA12 12A 600V Triac - TO-220 AC Switching Component

The BTA12 is a 12A 600V Triac designed for AC switching applications. It is supplied in a TO-220 through-hole package. This component manages AC loads in industrial and consumer electronic systems. It supports static relays, heating regulation, and induction motor starting circuits. The triac is also utilized in light dimmers and motor speed controllers. Key electrical specifications include a 600V peak off-state voltage and a 12A on-state current. It provides controlled power management for various circuits.

Specifications:

• Gate Turn-On Voltage (Vgt): 1.3V
• Peak Off-State Voltage (Vdrm): 600V
• On-State Current (It): 12.0A
• Gate Current (Igt): 35mA
• Average Gate Power Dissipation (Pg): 1W
• Package Type: TO-220
• Typical Voltage Change over Time (dV/dT): 500V/µs

Key features and benefits:

• Peak Off-State Voltage (Vdrm): 600V
• On-State Current (It): 12A
• Gate Turn-On Voltage (Vgt): 1.3V
• TO-220 Through-Hole Package
• Gate Current (Igt): 35mA
• Average Gate Power Dissipation (Pg): 1W
• Typical Voltage Change over Time (dV/dT): 500V/µs

Applications:

• Static Relays and Solid-State Switching
• Heating Regulation Systems
• Induction Motor Starting Circuits
• Light Dimming Controls
• Motor Speed Controllers

Frequently Asked Questions:

Q: Can this BTA12 triac replace other 12A 600V TO-220 triacs?
A: This BTA12 triac is a standard 12A 600V component in a TO-220 package. Compatibility with other triacs depends on matching electrical specifications (Vdrm, It, Igt, Vgt) and pinout. Refer to datasheets for direct cross-referencing.

Q: What is the recommended heatsink for the BTA12 12A triac?
A: Heatsink requirements depend on the specific application's power dissipation and ambient temperature. Consult the device's datasheet for thermal resistance values and calculate based on expected on-state current and duty cycle.

Q: Is the BTA12 suitable for inductive loads?
A: The BTA12 triac is suitable for inductive loads. Its dV/dT rating of 500V/µs helps manage voltage transients common with inductive switching. External snubber circuits may be required for highly inductive loads.

Q: What is the pinout configuration for the BTA12 TO-220 package?
A: The standard TO-220 pinout for a triac like the BTA12 is typically Main Terminal 1 (MT1), Main Terminal 2 (MT2), and Gate (G). Refer to the specific manufacturer's datasheet for exact pin assignments.

Package Includes:

*Image shown is a representation only.

Note: Contact sales(at)electroncomponents.com for bulk enquiry & get best price!