PIC16F688 Flash 4kbyte 8MHz Microcontroller with ADC and USART

PIC16F688 Flash 4kbyte 8MHz Microcontroller with ADC and USART
Product Code: MC_PIC16F688
Reward Points: 30
In Stock
International Shipping starts from 13 USD: DHL / Fedex (3-7 days priority delivery)

Price (Inclusive of Taxes): Rs.125.00
Price in reward points: 908

2 or more Rs.123.00
5 or more Rs.121.00
10 or more Rs.118.00
Qty:  
   - OR -   

PIC16F688 - 14-pin Flash 4kbyte 8MHz Microcontroller with ADC and USART

 

Specifications
  • 14-pin Microcontroller with USART
  • Flash Program Memory: 4096 bytes
  • EEPROM Data Memory: 256 bytes
  • SRAM Data Memory: 256 bytes
  • I/O Pins: 12
  • Timers: One 8-bit / One 16-bit
  • A/D Converter: 10-bit 8-Channel
  • Analog Comparator: 2
  • Internal Oscillator: 8MHz

 

Feature
  • High-Performance RISC CPU:
    • Only 35 Instructions to Learn:
      • All single-cycle instructions except branches
    • Operating Speed:
      • DC – 20 MHz oscillator/clock input
      • DC – 200 ns instruction cycle
    • Interrupt Capability
    • 8-level Deep Hardware Stack
    • Direct, Indirect and Relative Addressing modes
  • Special Microcontroller Features:
    • Precision Internal Oscillator:
      • Factory calibrated to ±1%
      • Software selectable frequency range of 8 MHz to 125 kHz
      • Software tunable
      • Two-Speed Start-Up mode
      • Crystal fail detect for critical applications
      • Clock mode switching during operation for power savings
    • Power-Saving Sleep mode
    • Wide Operating Voltage Range (2.0V-5.5V)
    • Industrial and Extended Temperature Range
    • Power-on Reset (POR)
    • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
    • Brown-out Reset (BOR) with Software Control Option
    • Enhanced Low-Current Watchdog Timer (WDT) with on-chip oscillator (software selectable nominal 268 seconds with full prescaler) with software enable
    • Multiplexed Master Clear with Weak Pull-up or Input Only Pin
    • Programmable Code Protection
    • High-Endurance Flash/EEPROM Cell:
      • 100,000 write Flash endurance
      • 1,000,000 write EEPROM endurance
      • Flash/Data EEPROM retention: > 40 years
  • Low-Power Features:
    • Standby Current:
      • 50 nA @ 2.0V, typical
    • Operating Current:
      • 11 μA @ 32 kHz, 2.0V, typical
      • 220 μA @ 4 MHz, 2.0V, typical
    • Watchdog Timer Current:
      • 1 μA @ 2.0V, typical
  • Peripheral Features:
    • 12 I/O Pins with Individual Direction Control:
      • High-current source/sink for direct LED drive
      • Interrupt-on-change pin
      • Individually programmable weak pull-ups
      • Ultra Low-Power Wake-up
    • Analog Comparator module with:
      • Two analog comparators
      • Programmable On-chip Voltage Reference (CVREF) module (% of VDD)
      • Comparator inputs and outputs externally accessible
    • A/D Converter:
      • 10-bit resolution and 8 channels
    • Timer0: 8-bit Timer/Counter with 8-bit Programmable Prescaler
    • Enhanced Timer1:
      • 16-bit timer/counter with prescaler
      • External Timer1 Gate (count enable)
      • Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator if INTOSC mode selected
    • Enhanced USART Module:
      • Supports RS-485, RS-232, LIN 2.0/2.1 and J2602
      • Auto-Baud Detect
      • Auto-wake-up on Start bit
    • In-Circuit Serial Programming™ (ICSP™) via two pins
 
*Image shown is a representation only.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: