Heat Shrink Tube [RED] - 12mm (1 Meter / per quantity) [12 mm red]

WOER Red 12mm Heat Shrink Tube - 1 Meter Length, 2:1 Shrink Ratio

The WOER Red 12mm Heat Shrink Tube provides electrical insulation and mechanical protection. It is supplied in a 1-meter length. This material facilitates wire bundling and cable management. It seals electrical joints, protecting them from environmental factors. A 2:1 shrink ratio ensures a secure fit. The tube prevents corrosion, abrasion, and short circuits. It offers strain relief for wiring systems. This product is suitable for color-coding and identification tasks.

Specifications:

• Length: 1 Meter
• Color: Red
• Brand: WOER
• Diameter (Pre-Shrink): 12mm
• Shrink Ratio: 2:1
• Shrink Temperature: 90°C
• Operating Temperature: -40°C to 125°C
• Tensile Strength: ≥10.4 MPa
• Dielectric Strength: ≥15 kV/mm
• Flammability: VW-1

Key features and benefits:

• 2:1 shrink ratio for secure fit.
• 12mm pre-shrink diameter.
• Red color for identification.
• Supplied in 1-meter lengths; multiple quantities ship as continuous piece up to 100m.
• Operating temperature range: -40°C to 125°C.
• Dielectric strength: ≥15 kV/mm.
• VW-1 flammability rating.
• Tensile strength: ≥10.4 MPa.

Applications:

• Bundling and organizing electrical wires and cables.
• Sealing and insulating electrical joints.
• Protecting wire connections from corrosion, abrasion, and moisture.
• Providing strain relief for cables at connection points.
• Color-coding and identification of wiring systems.

Frequently Asked Questions:

Q: What is the maximum continuous length supplied when ordering multiple units?
A: Multiple 1-meter quantities ship as a continuous piece up to 100 meters.

Q: What is the minimum diameter this 12mm heat shrink tube will shrink to?
A: With a 2:1 shrink ratio, the 12mm pre-shrink tube will shrink to a minimum diameter of 6mm.

Q: Is this heat shrink tube resistant to common industrial solvents?
A: The provided specifications do not detail resistance to specific industrial solvents. Refer to the material datasheet for chemical compatibility.

Q: What heat source is recommended for applying this heat shrink tubing?
A: A heat gun or other controlled heat source is recommended to achieve the specified 90°C shrink temperature.

Package Includes:

*Image shown is a representation only.

Note: Contact sales(at)electroncomponents.com for bulk enquiry & get best price!