SS41 - Low Gauss Bipolar Hall Effect Position Sesnors (Honeywell) General Description Hall-effect sensors accurately track extremely small changes in magnetic flux density—changes generally too small to operate Hall-effect switches.   As motion detectors, gear tooth sensors, and proximity detectors, they are magneticall..

IRF9540N (Hexfet Power Mosfet)   Fifth Generation HEXFETs from International Rectifier utilize advanced processing techniques to achieve extremely low  on-resistance per silicon area.  This benefit, combined with the fast switching speed and ruggedized device design that HEXFET Power MOSFETs are well known for, provides the d..

LDR 5mm - Photocell Features Coated with epoxy Good reliability Small volume High sensitivity Fast response Good spectrum characteristic *Image shown is a representation only...

1N4007 Diode SMD - M7 Standard Recovery Rectifiers Mechanical Characteristics Case: JEDEC DO-214AC molded plastic body Terminals: Solder plated, solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes cathode end Features The plastic package carries Underwriters Laboratory Flammability Classifi..

MMBTA42 (MPSA42) -HV transistor NPN SMD [High Quality]    Feature Collector-Emitter Volt (Vceo): 300V Collector-Base Volt (Vcbo): 300V Collector Current (Ic): 0.5A hfe: 40 @ 10mA Power Dissipation (Ptot): 625mW Current-Gain-Bandwidth (ftotal): 50MHz Type: NPN Package:SOT-23 &..

MOV-220k/30V (Metal Oxide Varistor) [10D/220K]Feature / Specifications Series: MOV-10D Varistor Type: Metal Oxide Varistor (MOV) Peak Surge Current @ 8/20µs: 500A Varistor Case: Disc 10mm Clamping Voltage Vc Max: 43V Voltage Rating V DC: 22V Voltage Rating V AC: 18V Operating Temperature Min: -40°C ..

MOV-275/20 [Metal Oxide Varistor] / 431K/20D Feature / Specifications Series: MOV-20D Varistor Type: Metal Oxide Varistor (MOV) Peak Surge Current @ 8/20µs: 6.5kA Varistor Case: Disc 20mm Clamping Voltage Vc Max: 710V Voltage Rating V DC: 350V Voltage Rating V AC: 275V Operating Temperature Min:..

PIR Motion Sensor High sensitive passive infrared sensor (Pyroelectric infrared sensor). High performance infrared sensor for use in visitor presense monitoring, can be used as ligh switches, alarm burglar systems, robotics etc. These compact, easy to use sensors can be easily implemented in any circuit. Specifications Type: T0..

PIR Motion Sensor Module [Original] High sensitive passive infrared motion sensor with stable digital output. Features/Specifications Operating voltage: DC5V to 20V Static power consumption: 65 microamps level output: high-3.3V, low-0V Delay Time: adjustable (0.3 seconds to 18 seconds) Embargo time: 0.2 secon..

Preset 100K Ω (ohm) (Variable Resistance) This adjustable or Variable resistor are PCB mountable and has 3 terminals. The voltagle between the terminal varies as the preset is rotated. The variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a ..

Preset 1K Ω (ohm) (Variable Resistance) This adjustable or Variable resistor are PCB mountable and has 3 terminals. The voltagle between the terminal varies as the preset is rotated. The variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a va..

Preset 1M Ω (ohm) (Variable Resistance) This adjustable or Variable resistor are PCB mountable and has 3 terminals. The voltagle between the terminal varies as the preset is rotated. The variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a va..

Preset 220K Ω (ohm) (Variable Resistance) This adjustable or Variable resistor are PCB mountable and has 3 terminals. The voltagle between the terminal varies as the preset is rotated. The variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a ..

Preset 4K7 Ω (ohm) (Variable Resistance) This adjustable or Variable resistor are PCB mountable and has 3 terminals. The voltagle between the terminal varies as the preset is rotated. The variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a v..

Preset 50K Ω (ohm) (Variable Resistance) This adjustable or Variable resistor are PCB mountable and has 3 terminals. The voltagle between the terminal varies as the preset is rotated. The variable resistors are used for variating voltage as per the need in a circuit. The outer two pins are connected to Vcc and 0V, and center pin outputs a v..