LNK 362 PN power Integrations - AC/DC Converters 2.6W 85-265VAC 2.8W 230VAC OCP 8DIP-7 (LNK362PN)
- Product Code: ICOA_LNK362PN
- Availability: In Stock
-
₹49.00 (+ GST)
- 10 or more quantity/sets : ₹48.00
- 25 or more quantity/sets : ₹47.00
- 50 or more quantity/sets : ₹46.50
- Shipping Charges Start from Rs.49*
- Fast Order Processing <24hr
- Shipment using reputed courier with 90% delivery in 1 - 3 working days
- All order with GST invoice (B2B: 100% cliam GST credit input tax)
LNK 362 PN power Integrations - AC/DC Converters 2.6W 85-265VAC 2.8W 230VAC OCP 8DIP-7 (LNK362PN) (Original)
General Description
The LNK362PN is a LinkSwitch-TN family lowest component count, Energy-efficient Off-line Switcher IC. It is specifically designed to replace all linear and capacitor-fed (cap dropper) non-isolated power supplies in the under 360mA output current range at equal system cost while offering much higher performance and energy efficiency. This device integrate a 700V power MOSFET, oscillator, simple on/off control scheme, a high-voltage switched current source, frequency jittering, cycle-by-cycle current limit and thermal shutdown circuitry onto a monolithic IC. The start-up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias supply and associated circuitry in buck or flyback converters. The fully integrated auto-restart circuit in the safely limits output power during fault conditions such as short-circuit or open loop, reducing component count and system-level load protection cost.
Unique Characteristics / Feature
- Lowest component count buck converter solution
- Uses a simplified controller without auto-restart
- Tight tolerances and negligible temperature variation
- Supports buck, buck-boost and flyback topologies
- Excellent line and load regulation even with typical configuration
- High bandwidth provides fast turn-on with no overshoot
- Current limit operation rejects line ripple
- Universal input voltage range (85 to 265VAC)
- Built-in current limit and hysteretic thermal protection
- Higher efficiency than passive solutions
- Higher power factor than capacitor-fed solutions
Specifications
- Model : Converter
- Type AC/DC-Offline (non isolated)
- Topology: Flyback
- Mounting form DIP-8B-7
- Input voltage 85 - 265 VAC VDC
- Voltage - Breakdown:700V
- Power: 2.6W @ 85-265VAC / 2.8W @ 230VAC
- No. of Pins: 7Pins
- Temperature range -40 - +150 Deg C
- Frequency 132 kHz
*Image shown is a representation only.
Note: Contact sales(at)electroncomponents.com for bulk enquiry & get best price!