PIC16F688 Flash 4kbyte 8MHz Microcontroller with ADC and USART
- Product Code: MC_PIC16F688
- Availability: Out Of Stock
-
₹295.00 (+ GST)
- 10 or more quantity/sets : ₹113.00
- 25 or more quantity/sets : ₹112.00
Out of Stock
- Shipping Charges Start from Rs.49*
- Fast Order Processing <24hr
- Shipment using reputed courier with 90% delivery in 1 - 3 working days
- All order with GST invoice (B2B: 100% cliam GST credit input tax)
PIC16F688 - 14-pin Flash 4kbyte 8MHz Microcontroller with ADC and USART
Specifications
- 14-pin Microcontroller with USART
- Flash Program Memory: 4096 bytes
- EEPROM Data Memory: 256 bytes
- SRAM Data Memory: 256 bytes
- I/O Pins: 12
- Timers: One 8-bit / One 16-bit
- A/D Converter: 10-bit 8-Channel
- Analog Comparator: 2
- Internal Oscillator: 8MHz
Feature
-
High-Performance RISC CPU:
-
Only 35 Instructions to Learn:
- All single-cycle instructions except branches
-
Operating Speed:
- DC – 20 MHz oscillator/clock input
- DC – 200 ns instruction cycle
- Interrupt Capability
- 8-level Deep Hardware Stack
- Direct, Indirect and Relative Addressing modes
-
Only 35 Instructions to Learn:
-
Special Microcontroller Features:
-
Precision Internal Oscillator:
- Factory calibrated to ±1%
- Software selectable frequency range of 8 MHz to 125 kHz
- Software tunable
- Two-Speed Start-Up mode
- Crystal fail detect for critical applications
- Clock mode switching during operation for power savings
- Power-Saving Sleep mode
- Wide Operating Voltage Range (2.0V-5.5V)
- Industrial and Extended Temperature Range
- Power-on Reset (POR)
- Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
- Brown-out Reset (BOR) with Software Control Option
- Enhanced Low-Current Watchdog Timer (WDT) with on-chip oscillator (software selectable nominal 268 seconds with full prescaler) with software enable
- Multiplexed Master Clear with Weak Pull-up or Input Only Pin
- Programmable Code Protection
-
High-Endurance Flash/EEPROM Cell:
- 100,000 write Flash endurance
- 1,000,000 write EEPROM endurance
- Flash/Data EEPROM retention: > 40 years
-
Precision Internal Oscillator:
-
Low-Power Features:
-
Standby Current:
- 50 nA @ 2.0V, typical
-
Operating Current:
- 11 μA @ 32 kHz, 2.0V, typical
- 220 μA @ 4 MHz, 2.0V, typical
-
Watchdog Timer Current:
- 1 μA @ 2.0V, typical
-
Standby Current:
-
Peripheral Features:
-
12 I/O Pins with Individual Direction Control:
- High-current source/sink for direct LED drive
- Interrupt-on-change pin
- Individually programmable weak pull-ups
- Ultra Low-Power Wake-up
-
Analog Comparator module with:
- Two analog comparators
- Programmable On-chip Voltage Reference (CVREF) module (% of VDD)
- Comparator inputs and outputs externally accessible
-
A/D Converter:
- 10-bit resolution and 8 channels
- Timer0: 8-bit Timer/Counter with 8-bit Programmable Prescaler
-
Enhanced Timer1:
- 16-bit timer/counter with prescaler
- External Timer1 Gate (count enable)
- Option to use OSC1 and OSC2 in LP mode as Timer1 oscillator if INTOSC mode selected
-
Enhanced USART Module:
- Supports RS-485, RS-232, LIN 2.0/2.1 and J2602
- Auto-Baud Detect
- Auto-wake-up on Start bit
- In-Circuit Serial Programming™ (ICSP™) via two pins
-
12 I/O Pins with Individual Direction Control:
*Image shown is a representation only.
Note: Contact sales(at)electroncomponents.com for bulk enquiry & get best price!